LS1203

Back to search results...

Zebra LS1203 Specifications

Physical Characteristics
Dimensions: 2.4 in. H x 7.1 in. L x 2.4 in. W 6.2 cm H x 18 cm L x 6 cm W
Weight (w/o cable): Approximately 4.3 oz. (122 g)
Voltage & Current: 5 +/-10%VDC @ 100 mA (Stand by: <35 mA)
Power Source: Host power or external power supply
Colour: Cash Register White or Twilight Black
User Environment
Operating Temp.: 32° to 122° F/0° to 50° C
Storage Temp.: -40° to 158° F/-40° to 70° C
Humidity: 5% to 95% relative humidity, non-condensing
Drop Specs: Withstands multiple 5 ft./1.524m drops to concrete
Ambient Lighting Tolerance: Tolerant to typical artificial indoor and natural outdoor (direct sunlight) lighting conditions. Fluorescent, Incandescent, Mercury Vapor, Sodium Vapor, LED4: 450 Ft Candles (4,844 Lux) Sunlight: 8000 Ft Candles (86,111 Lux)
Beeper Volume: User-selectable: three levels
Beeper Tone: User-selectable: three tones
Electrostatic Discharge (ESD): Conforms to 15 kV air discharge and 8 kV of contact discharge
Performance Characteristics
Scanner Type: Bi-directional
Light Source (Laser): 650nm laser diode
Scan Rate: 100 scans per second
Typical Working Distance: See chart below.
Print Contrast Min.: 30% minimum reflectance
Roll (Tilt):1 ± 30° from normal
Pitch:2 ± 65°
Skew (Yaw):3 ± 60°
Decode Capability: UPC/EAN, UPC/EAN with Supplementals, UPC/EAN 128, Code 39, Code 39 Full ASCII, Code 39 TriOptic, Code 128, Code 128 Full ASCII, Codabar, Interleaved 2 of 5, Discrete 2 of 5, Code 93, MSI, Code 11, IATA, GS1 DataBar (formerly RSS) variants, Chinese 2 of 5
Interfaces Supported: USB, RS-232; Keyboard Wedge
Regulatory
Electrical Safety: UL1950, CSA C22.2 No. 950, EN60950/IEC950
Laser Safety: IEC Class 1
EMI/RFI: FCC Part 15 Class B, ICES-003 Class B, European Union EMC Directive, Australian SMA, Taiwan EMC, Japan VCCI/MITI/Dentori
1 – Roll (Tilt): Controlled by rotating the wrist clockwise or counterclockwise 2 – Pitch: Controleed by dropping or raising the wrist 3 – Skew (Yaw): Controlled by rotating the wrist from left to right or vice versa 4 – LED lighting with high AC ripple content can impact scanning performance