Back to search results...


Dimensions 3.62 in. L x 3.19 in. W x 0.94 in D 92 mm L x 81 mm W x 24 mm D
Weight 4.4 oz./124 g
Colours Healthcare White; Black
Display 3.0 inch E Ink Pearl display; 4-bit gray scale (16 shades); QVGA (320×240)
Touchpanel Full screen resistive touch; finger operation (no stylus)
Battery 910mAH (full charging in less than 4 hours)
Notification Audio: beeper Visual: multi-colour LEDs
Audio Integrated microphone, speaker, 2 PTT buttons (public and private), and headset jack
CPU i.MX35 (532MHz)
Memory 128 MB RAM /128 MB Flash
Applications Supports thin client applications — HTML5 with RhoElements extensions
Operating Temp. 32° F to 104° F/0° C to 40° C
Storage Temp. -40° F to 158° F/-40° C to 70° C
Humidity 5 to 95% non-condensing
Drop Specification Multiple 4 ft./1.22 m drop to tile over concrete per MIL STD 810G specifications
Sealing IP54
Motion Sensor Integrated accelerometer enables low-power badge mode and screen rotation
Bar Code Reader 1-D/2-D omni-directional bar code reader with integrated aiming and built-in illumination
Reading Range
Code Type
80% UPC Near: 2.50 in./6.35 cm Far: 9.36 in./23.77 cm
100% UPC Near: 2.67 in./6.78 cm Far: 13.47 in./34.21 cm
7.5mil Code 39 Near: 2.02 in.*/5.08 cm Far: 8.57 in./5.13 cm
10mil Code 39 Near: 2.54 in.*/6.45 cm Far: 20.67 in./52.50 cm
10mil PDF417 Near: 1.64 in.*/4.16 cm Far: 7.98 in./20.27
10mil DataMatrix Near: 2.76 in.*/7.01 cm Far: 5.41 in./13.74 cm
* Near distance field of view is limited and will depend on bar code length.
PTT voice communications; integrated microphone, speaker and headset for PTT communications
Radio Wi-Fi IEEE ® 802.11b/g/n
Zebra Solutions RhoElements webkit application environment; SB1 device shell and configuration pages; Zebra Solutions Push-to-Talk Express (PTT ) client for PTT voice communications; Zebra Solutions integrated Rapid Deployment client for zero-touch staging and provisioning
10-slot charging cradle (desk and rack mountable); single-slot charging cradle; headset adapter; neck lanyard with safety breakaway; belt clip/holster with tether; wrist/arm-band; developer USB cable
Approved Cleanser Active Ingredients: 100% of the active ingredients in any cleaner must consist of one or some combination of the following: isopropyl alcohol; hydrogen peroxide; mild dish soap
Harmful Ingredients: The following chemicals are known to damage the plastics on the SB1-HC devices and should not come in contact with the device: ammonia solutions, compounds of amines or ammonia; acetone; ketones; ethers; aromatic and chlorinated hydrocarbons; aqueous or alcoholic alkaline solutions; ethanolamine; toluene; trichloroethylene; benzene; carbolic acid and TB-lysoform. In addition, bleach solutions are known to corrode gold contacts over time.
Cleaning Instructions: Do not apply liquid directly to the SB1-HC devices. Dampen a soft cloth or use pre-moistened wipes. Do not wrap the device in the cloth or wipe, but gently wipe the unit. Be careful not to let liquid pool around the display window or other places. If a solution containing bleach is used on the gold contacts, it is recommended that an immediate wipe down using isopropyl alcohol (IPA) be administered to remove residuals. Allow unit to dry before use.
Special Cleaning Notes: Many vinyl gloves contain phthalate additives, which are often not recommended for medical use and are known to be harmful to the housing of the SB1-HC devices. The SB1-HC devices should not be handled while wearing vinyl gloves containing phthalates, or before hands are washed to remove contaminant residue after gloves are removed. If products containing any of the harmful ingredients listed above are used prior to handling the SB1-HC devices, such as hand sanitisers that contain ethanolamine, hands must be completely dry before handling the devices to prevent damage to the plastics